Browse Community
Help
Log In
Responses(2)
Solutions(0)
DELL-Josh Cr
Moderator
•
9.5K Posts
0
October 17th, 2018 13:00
Hi,
It should get the VLANs from the port channel config after it is added, so this sounds correct.
szuwaaar
3 Posts
October 17th, 2018 23:00
The difference is that when the port-channel is inactive the vlans are not present on slave gigabit interface. On old 6248 the vlans were still working on slave gigabit interface when port-channel was inactive.
Dell Support Resources
View All
Top
DELL-Josh Cr
Moderator
•
9.5K Posts
0
October 17th, 2018 13:00
Hi,
It should get the VLANs from the port channel config after it is added, so this sounds correct.
szuwaaar
3 Posts
0
October 17th, 2018 23:00
The difference is that when the port-channel is inactive the vlans are not present on slave gigabit interface. On old 6248 the vlans were still working on slave gigabit interface when port-channel was inactive.