Unsolved
This post is more than 5 years old
6 Posts
0
17627
October 15th, 2015 02:00
vrrp virtual address not responding to ping
There are several vrrp's configured on DELL Power Connect N3024. Failover is working fine.
Trace route showing the vrrp addresses. But when I try to ping them, they are not responding.
Is there a parameter missing in my configuration?
interface vlan 2
vrrp 2
vrrp 2 mode
vrrp 2 description Active
vrrp 2 ip 10.236.25.1
vrrp 2 priority 200
vrrp 2 preempt delay 15
exit
interface vlan 3
vrrp 3
vrrp 3 mode
vrrp 3 description Active
vrrp 3 ip 10.200.25.100
vrrp 3 priority 200
vrrp 3 preempt delay 15
exit
interface vlan 4
vrrp 4
vrrp 4 mode
vrrp 4 description Active
vrrp 4 ip 10.238.60.100
vrrp 4 priority 200
vrrp 4 preempt delay 15
exit
interface vlan 5
vrrp 5
vrrp 5 mode
vrrp 5 description Active
vrrp 5 ip 10.238.58.100
vrrp 5 priority 200
vrrp 5 preempt delay 15
exit
interface vlan 6
vrrp 6
vrrp 6 mode
vrrp 6 description Active
vrrp 6 ip 10.238.56.100
vrrp 6 priority 200
vrrp 6 preempt delay 15
DELL-Josh Cr
Moderator
•
9.5K Posts
0
October 15th, 2015 10:00
Hi,
Do you have spanning-tree enabled, sometimes it can cause ping to not work with VRRP. What version is the firmware at?
Volker Laude
6 Posts
0
October 16th, 2015 06:00
Thanks for your revert - Please find the requested details underneath:
Machine Description............... Dell Networking Switch
System Model ID................... N3024
Machine Type...................... Dell Networking N3024
Serial Number..................... CN0PDJ93282985250100A02
Manufacturer...................... 0xbc00
Burned In MAC Address............. F8B1.566F.3A9C
System Object ID.................. 1.3.6.1.4.1.674.10895.3057
SOC Version....................... BCM56342_A0
HW Version........................ 5
CPLD Version...................... 13
unit active backup current-active next-active
---- ----------- ----------- -------------- --------------
1 6.1.0.6 6.1.0.6 6.1.0.6 6.1.0.
Spanning tree :Enabled - BPDU Flooding :Disabled - Portfast BPDU filtering :Disabled - mode :rstp
CST Regional Root: 80:00:F8:B1:56:6F:3A:9C
Regional Root Path Cost: 0
ROOT ID
Priority 32768
Address F8B1.566F.3A9C
This Switch is the Root.
Hello Time 2 Sec Max Age 20 sec Forward Delay 15 sec TxHoldCount 6 sec
Bridge Max Hops 20
Interfaces
Name State Prio.Nbr Cost Sts Role Restricted
--------- -------- --------- --------- ---- ----- ----------
Gi1/0/1 Disabled 128.1 0 DIS Disb No
Gi1/0/2 Enabled 128.2 0 DIS Disb No
Gi1/0/3 Enabled 128.3 0 DIS Disb No
Gi1/0/4 Enabled 128.4 0 DIS Disb No
Gi1/0/5 Enabled 128.5 0 DIS Disb No
Gi1/0/6 Enabled 128.6 0 DIS Disb No
Gi1/0/7 Enabled 128.7 0 DIS Disb No
Gi1/0/8 Enabled 128.8 0 DIS Disb No
Gi1/0/9 Enabled 128.9 0 DIS Disb No
Gi1/0/10 Enabled 128.10 0 DIS Disb No
Gi1/0/11 Enabled 128.11 0 DIS Disb No
Gi1/0/12 Enabled 128.12 0 DIS Disb No
Gi1/0/13 Enabled 128.13 0 DIS Disb No
Gi1/0/14 Enabled 128.14 0 DIS Disb No
Gi1/0/15 Enabled 128.15 0 DIS Disb No
Gi1/0/16 Enabled 128.16 0 DIS Disb No
Gi1/0/17 Enabled 128.17 0 DIS Disb No
Gi1/0/18 Enabled 128.18 0 DIS Disb No
Gi1/0/19 Enabled 128.19 0 DIS Disb No
Gi1/0/20 Enabled 128.20 0 DIS Disb No
Gi1/0/21 Enabled 128.21 0 DIS Disb No
Gi1/0/22 Enabled 128.22 0 DIS Disb No
Gi1/0/23 Enabled 128.23 0 DIS Disb No
Gi1/0/24 Enabled 128.24 0 DIS Disb No
Te1/0/1 Enabled 128.25 0 DIS Disb No
Te1/0/2 Enabled 128.26 0 DIS Disb No
Tw1/0/1 Enabled 128.27 0 DIS Disb No
Tw1/0/2 Enabled 128.28 0 DIS Disb No
DELL-Josh Cr
Moderator
•
9.5K Posts
0
October 16th, 2015 10:00
Are there any ACL rules that would block ping? You may also want to try updating the firmware.