Networking, Internet, & Bluetooth

[clockwood]

192.168.1.1 login / admin Tp-link password reset for access to the modem interface, return to factory settings  I did everything but did not access my pc Dell 5567-G20W81C I have a computer but I cannot get to the modem interface. (my windows 10 system)

I can get on the other computer but can not login with dell? Help....

Configuring the modem settings solves the problem, but it is the same again when you turn it on and off.

I got help from these two sites: 

192.168.1.1 - 192.168.1.1

[DELL-Lijo J]

Hi,

Welcome to our Community.

You’ve reached the right department. We’ll surely try to assist you. Please let us know,

1. Is the Modem and the computer on the same network?
2. Are you getting any error message specifically when trying to connect the system to the network?
3. Also, check the cable connecting from the computer to the Modem.

[jennyhannb]

If you can not reach the login page, it may be due to: Entering the IP address 192.168.1.1 incorrectly. An IP address issue on the computer. A hardwired connection configuration issue or a bad Ethernet cable. An issue with the wireless router itself.

internet speed test google

[rathodeforias]

Here is the Complete guide on how to login WiFi router through https://192-168-0-1-1.online/ IP and 192.168.1.1 router admin login. Default username and password list for all routers. How to find your router's username, password and IP address easily.

[Mary G]

One thing to remember--you cannot access the interface on a wireless connection. You must use an Ethernet cable connection. 

This is an old post that was solved long ago. Maybe it will help someone else.

[Andrew K Hinkle · Accepted solution]

Don’t worry if you don’t know the Login Procedure. We will Guide you to Login 192.168.1.1 with some Easy Steps.

• Click here or Type http://192.168.1.1 in any of your Browser Address bar. (Firefox, Google Chrome, Safari, IE).
• If the 192.168.1.1 is Not Working, then 19216811.is not your Default IP Gateway.
• Once you found the Right IP Address, Enter the Same into your Browser Address Bar.
• Next, a Pop-up Box appears asking you to Enter Username and Password.
• Also, Follow Default Username and Password of Router If in case you need it.
• Then, Put down the Login Credentials and you will be given Web-Interface Access Immediately.
• Done, You have Successfully Login to Admin Panel using 192.168.1.1 IP Address.

[tomsmiths]

Click on Wireless router setup 192.168.1.1

[tomsmiths]

Click on Wireless router setup 192.168.1.1