Unsolved
This post is more than 5 years old
3 Posts
0
39641
Missing Network and SM BUS controller after Windows 7 reinstall
I have exclamation points on the network and sm bus controller driver. Need help installing drivers. I have a Dell Optoplex 9010
the device instance id for the network is:
PCI\VEN_14E4&DEV_4359&SUBSYS_00111028&REV_00\4&24AAD2EF&0&00E2
the sm bus:
PCI\VEN_8086&DEV_1E22&SUBSYS_052C1028&REV_04\3&11583659&0&FB
DELL-Todd S
1.8K Posts
0
October 5th, 2015 11:00
Hi,
If you go to the main Dell support pages, input your service tag, the pages will redirect you to the support content specific to your Optiplex. From there click on the Drivers & Downloads link and when those load up make sure you filter the operating system to the correct OS you're running (whether it's 64-bit or 32-bit Windows 7, etc). Then you can download and install the drivers you need for that system.
Let us know if you have any additional questions or need more help and we'll see what we can do for you.
Todd
Philip_Yip
7 Technologist
7 Technologist
•
16K Posts
1
October 5th, 2015 15:00
Assuming Windows 7 64 Bit.
You should install the Intel (Vendor 8086) Chipset Drivers. It is likely the Management Engine Interface:
http://downloads.dell.com/FOLDER00295952M/21/DRVR_Chipset_Intel_A00-CPNKY_setup_ZPE.exe
http://downloads.dell.com/FOLDER01923192M/1/Chipset_Driver_GJVHD_WN_9.5.15.1730_A02.EXE
http://downloads.dell.com/FOLDER00997163M/14/Intel_Chipset_7-Series_USB3_FJ3FJ_A03_SETUP_ZPE.exe
The Broadcom (vendor 14E4) Network Controller is a Dell Wireless 1530 (Broadcom) card:
http://downloads.dell.com/FOLDER01766978M/1/Network_Driver_TYJ5H_WN_5.100.82.112_A01.EXE
mouazhloany
1 Message
0
October 19th, 2019 06:00
Harwinder60262
1 Message
0
November 14th, 2023 13:26
how to drivers download ?