Communicating different VLAN using MSTP.

Hi all, 

I'm a beginner engineer, so I have a little knowledge.

I tried to configure by myself, but some problem was bothering me..

I want you guys to help me!!

 

Actually I configured MSTP using the 4 switches(CISCO&DELL).

Please show the attachment pictured and configuring file(.txt) ( I draw it and scanned..)

As you can see the picture, you'll know what I want to configure.

 

The point I want is following contents.

(855) 935-7526 ***. I want to communicate with whole switches.

=> but, Dell 7024P does not communicate any other switches.. I think assigning IP is vlan 30(192,168.10.91) ... others have

vlan 10(192.168.10.x)

Actually, It was very big issue.

 

2. Only Dell 7024P does not communicate with Internet.

 

So, I configured whole switches static routing (ip route 0.0.0.0 0.0.0.0 192.168.10.94)

But only 7024P does not communicate..

 

In order to connect each other, what can I do in the Dell 7024P switch.

Thank you Daniel C.

[View:/cfs-file/__key/communityserver-discussions-components-files/866/CISCO3560-show-run_2C00_-stp.txt:550:0]

[View:/cfs-file/__key/communityserver-discussions-components-files/866/CISCO3750-show-run_2C00_-stp.txt:550:0]

[View:/cfs-file/__key/communityserver-discussions-components-files/866/DELL7024P-show-run_2C00_-stp.txt:550:0]

[View:/cfs-file/__key/communityserver-discussions-components-files/866/DELL8024F-show-run_2C00_-stp.txt:550:0]