The debug mode on current PowerConnect switches is not a real-time debug similar to that found on most Cisco devices. It is primarily intended to be a method for software engineers to look at the memory registers to debug software problems. The interface is not user-friendly and there is no documentation on how to navigate it.
If you would still like to be provided with the debug password, please contact technical support via phone at (800) 822-8965 and follow the prompts for Server and PowerConnect.
If you could share details on the device you need assistance with, the OS it is running, and the troubleshooting steps already taken, it would be helpful. If you need assistance with the PowerConnect 5324, you can find the relevant manuals linked below.
GregG1
2 Intern
•
812 Posts
1
October 26th, 2005 16:00
WFmaia
2 Posts
0
December 20th, 2021 08:00
I need to get out of this debug module and get back to normal. How do I do it?
Dell-DylanJ
4 Operator
•
2.9K Posts
0
December 20th, 2021 13:00
If you could share details on the device you need assistance with, the OS it is running, and the troubleshooting steps already taken, it would be helpful. If you need assistance with the PowerConnect 5324, you can find the relevant manuals linked below.
PowerConnect 5324 Support Documentation: https://dell.to/3ElRRxe