Unsolved
This post is more than 5 years old
2 Posts
0
29622
September 17th, 2004 10:00
Internal Mac Transmit Errors
Hello
I have a 3324 Switch. With this Switch i have smal Problems. On one Port i have connect a PowerEdge 2600 Server with Windwos SBS 2003. On this Server i have install the Virtual Server 2005 eval. from MS. The Problem is now, thats i loosing my conection from time to time. Wenn i start a VM und i want to load a SW from the physical Server(on this running the Virtual Server). Im loosing the conection for 10sec to 1minut. Wenn i look on the Switch, i see thats the Internal Mac Transmit Errors get up on this Port. Actual is 1797 Errors.
Can you help my?
Damian
ps: Sorry, my English ist Bad, my favorit language is German.
No Events found!
GregG1
2 Intern
•
812 Posts
0
September 17th, 2004 11:00
See the following forum post for similar symptoms and recommendations:
http://forums.us.dell.com/supportforums/board/message?board.id=pc_managed&message.id=2800
If you determine that some ports that are "flapping", this is usually caused by physical layer problems. Newer network devices are more sensitive to sub-standard cabling issues. Try swapping with pre-fabricated store-bought cables. If the problem persists, try swapping ports, NICs, etc.