Unsolved
This post is more than 5 years old
1 Rookie
•
46 Posts
0
36460
October 16th, 2014 12:00
Network link issue VRTX
Hi
We have a problem when connecting the ports of Pass-Thru Module to a "switch cisco 2960S", the server (windows 2012 R2) gives an error "Network Cable Unplugged" on both cards, and no Network link in the switch and no link in the module either. In that same switch we have other servers working perfectly, Could you tell me if we have to configure anything in the VRTX or in switch so that server has network link?
Thanks a lot
No Events found!
UweT
1 Message
1
October 25th, 2014 10:00
Fighted now since 3 hours with that until I found out that the Pass-Thru Modules are GBIT only on the blades.....so set the Ports in gbit mode on your switch and you should be up and running. (assuming the 2960s is a gbit switch).
Solved my issue and hope will help others comming accross this post.