Unsolved
This post is more than 5 years old
25 Posts
0
2507
March 20th, 2017 01:00
PC8024F
Hi,
After setting no enable password on my PC8024F , firmware 5.1.1.7, when i'm connected by SSH on it, i cannot enable it with success, i have the authentication failed error....
Do you have any ideas ?
Thanks,
No Events found!
zbobz
25 Posts
0
March 20th, 2017 07:00
not now, i'll go on site tomorrow to edit the configuration with a console cable:Ss
zbobz
25 Posts
0
March 21st, 2017 08:00
Hi,
Please find the part of the configuration related to this case:
username "admin" password ac09c5045f45c8fd3c125f0b3b742e4b privilege 15 encrypted
username "rancidPoll" password 1b430c6g7deb13487f016d09e7c66fce privilege 15 encrypted
ip ssh server
snmp-server engineid local 800002a203d067e5994fd4
snmp-server community "Monitoring" rw
enable password ac09c5045b345tkf25cTu3b742e4b encrypted
FYI, the firmware version is : 5.0.0.4
Many thanks for your help
zbobz
25 Posts
0
March 21st, 2017 11:00
Yes, still present because i re-add it in the config file to allow remote ssh enable session.
if i configure no enable password. when i use SSH to remotely connect to the switch, the message is : authentication failed after typing en...
I hope that a firmware update will solve the trick...
As this trick os only to allow rancid backuping the configuration, do you have any rancid clogin script working good with Dell PConnect switches ?
zbobz
25 Posts
0
March 22nd, 2017 01:00
ok, but no enable password should be working after a firmware upgrade ?
zbobz
25 Posts
0
March 22nd, 2017 08:00
Yes, of course i'll do it, thanks