Unsolved
1 Message
0
479
Optiplex 7010 bios update failed to run in Start-process of Powershell
The following PowerShell script for BIOS update works for most Dell models except 7010 and 9020.
## Dell Bios update script
$CN ="pc-1"
# the bios .exe file has been copied to remote computer pc-1 in folder path c:\localapps\Dell-Bios\O7010A29.exe
Invoke-command -ComputerName $CN { Start-Process c:\localapps\Dell-Bios\O7010A29.exe -ArgumentList "/ nopause /s /f /p=xxxx /bls " -wait}
Note: If I replace the exe file with "Optiplex_5090_1.10.0.exe (model 5090), then the script ran perfectly.
John harper
2 Intern
2 Intern
•
346 Posts
0
September 30th, 2022 00:00
Press Ctrl key + Esc key until the BIOS Recovery screen appears. Release the Ctrl key + Esc key. In the BIOS Recovery screen, choose Reset NVRAM and press Enter. Choose Disabled and press Enter to save current BIOS settings.