This post is more than 5 years old
111 Posts
0
22170
What is My PE2600 Processor
While I like Dell support such as My Systems I have always had a problem with the descriptions in "Original System Information".
I have a PE 2600 with Windows Server 2003 at home. It has a single Xeon processor and I am considering going dual. I already have the VRM but am perplexed at what kind of processor I need.
When I lookup my System Information for my service tag it says:
U0621 Processor, 80532K, 2.4GHz, 512K 533, DECISION ONE
To confuse matters worse the manual says it has a 400Mhz front side bus. Doesn't this indicate a 2.4GHz with a 533MHz front side bus?
What kind of processor is it?
And is it socket 604 as that seems to be what is available on EBay? Variety of 604 Xeon as it appears there are differnet types?
Thanking you in advance,
Peter
Dennis Smith
946 Posts
1
May 13th, 2009 10:00
If you send me your service tag in a private message, I can look it up for you.
Dev Mgr
9.3K Posts
1
May 13th, 2009 11:00
Download and run cpu-z from cpuid. It'll tell you what exact processor you have.
As for the manual; the early revisions of the 2600/2650 only supported a 400MHz bus, but later a 533MHz update on the Intel chipset was released and inplemented. The manuals were probably never updated to reflect this.
thomas.murlis
5 Posts
1
May 13th, 2009 11:00
Hey peter, you have an Intel Xeon 2.4B, Retail part number RK80532KE056512. your motherboard should support 2 Xeon 3.2 processors, part number
pierrejamme
111 Posts
0
May 13th, 2009 13:00
Dennis,
Been a while since I frequented this forum but I think I sent you a message.
Thanks for the prompt reply. Peter
pierrejamme
111 Posts
0
May 13th, 2009 14:00
Thanks for the prompt reply. I was able to find information on the RK80532KE056512 at Intel
pierrejamme
111 Posts
0
May 13th, 2009 14:00
Thanks for the prompt reply. The manual thing is probably true, sad to say. i do have a copy of CPU-Z and will check it out when I get it going again.
thanks