Have you gotten a TPM failure or TPM information missing recently? Here are some steps that you can do to resolve your issue.

THIS WILLL REQUIRESYSTEM DOWNTIME

Place the host into Maintenance Mode and then reboot the system. While the system is rebooting, press F2 to enter the System Setup menu (BIOS) and select System BIOS.

Scroll down and choose ‘System Security.’

Select "TPM Advanced settings"

Set TPM2 Algorithm Selection to SHA256 and click Back

Set Intel TXT to On

Scroll down and enable Secure Boot (click OK at the pop up asking you to set a BIOS password)

Click Back to return to the main System BIOS, then click Finish and click Yes to save changes

Click Finish in the System Setup Menu, and confirm Yes to exit and reboot. Upon the next boot, you should see a message indicating that Secure Boot has been modified. No further action is required.

9. After it returns to vCenter, navigate to the host and clear the ‘Host TPM attestation alarm’ alert by clicking ‘Reset to Green.’ Finally, exit Maintenance Mode.

Here are some additional threads that you can review as well.

‎"TPM failure." during POST on Poweredge T620 | DELL Technologies

‎TPM information | DELL Technologies

Pinned Posts

14G Intel PowerEdge: Coin-cell battery changes

Upgrading BIOS and iDRAC9 for 14th generation PowerEdge servers

TPM information missing or getting TPM failure

March Post Summary FAQ

MAY POST SUMMARY FAQ

PowerEdge Hardware General

CPU 1 error (Error Code: CPU0704).

Poweredge T440 lack of PCIe X 16 slots

T150 EOL OFFICIAL STATEMENT

datacenter equipment

Dell Process for ECCN 3A090 Export License Requests to Benin

R6715 hourly latency spikes after iDRAC upgrade to 1.30.20.10

Warranty

End of life of Dell PowerEdge R360

miscellaneous trap

ConnectX-6 firmware update fails

Test post2

Test post

Dell R750XA works with NVIDIA 2x H100 in NVLINK ?

Firmware upgrade ISO fails to upgrade Systems Management Application - stuck in the loop

PowerEdge R440 LED panel fault

Latest Solutions

datacenter equipment

R6715 hourly latency spikes after iDRAC upgrade to 1.30.20.10

miscellaneous trap

PowerEdge R440 LED panel fault

Recovering Dell iDRAC7 Enterprise licence - August 2026

Dell Support Resources