This post is more than 5 years old
2 Posts
0
250921
Compatibility Dell PowerEdge T110 II + PERC H200 + Windows Server 2012 Std
We have just purchased a new Dell PowerEdge T110 II server with a build in PERC S100 Raid controller. We would like to use 2 x 1Tb SATA hard drives in RAID1.
Once we have tried to install Windows Server 2012 Std, the drivers for PERC S100 could not be found. I have checked more deeply and found out that S100 is not supported by Windows Server 2012
So I would like to know if PERC H200 controller will work with Windows Server 2012 OS and PowerEdge T110 II? (Could not find drivers for 2012, only for 2008 R2.)
theflash1932
9 Legend
9 Legend
•
16.3K Posts
0
February 7th, 2013 08:00
The H200 driver should be "native" (built-in) to 2012:
en.community.dell.com/.../3492.windows-server-2012-inbox-driver-support-on-dell-poweredge-servers.aspx
The H200 is part of the PERC 7 [hardware RAID] family:
content.dell.com/.../dell-raid-controllers.aspx
DELL-Chris H
Moderator
Moderator
•
8.8K Posts
0
February 7th, 2013 05:00
IT Partner,
The H200 is compatible with the T110 II.
With 3.5 in drives you would need part number 342-3347, for 2.5 inch drives you would need part number 342-3389.
Let me know if this is what you were looking for.
Thanks.
ITpartner
2 Posts
0
February 7th, 2013 06:00
Hi! Thank you for your reply!
I have also found out that H200 is compatible with the T110 II. But what about Windows Server 2012 OS? Will I meet any problems with drivers support, like I have with build-in PERC S100 (that is not supported by winserver 2012)?
Thanks.