Unsolved
This post is more than 5 years old
3 Posts
0
5075
August 7th, 2007 07:00
Device failed the SMART test
Hi,
I have PE2850, PERC 4e/Di (RAID 5: 6*SCSI Maxtor). One HDD status LED flashing Green - Amber - Off.
Dell PowerEdge Diagnostics - Results:
ID Device Name Test Name Result Code
Result
1 Array Disk 0:2 LSI Array Disk Test 414 Device failed the SMART test: Check SCSI cable connections and termination and run this test again. If this error persists, it indicates a hardware problem.
1 Array Disk 0:2 LSI Array Disk Test 414 Device failed the SMART test: Check SCSI cable connections and termination and run this test again. If this error persists, it indicates a hardware problem.
How I can solve a problem?
I tried to switch off a server, took out and inserted a disk. I could not solve a problem.
Please, help me.
No Events found!
Alex Shulg
3 Posts
0
August 7th, 2007 08:00
My English is too bad to consult by phone
tommo666
4 Apprentice
•
1.2K Posts
0
August 7th, 2007 08:00
at5147
884 Posts
0
August 8th, 2007 20:00
www.dell.com/enterprisechat
or there is email support as well
www.dell.com/enterpriseemail
Message Edited by at5147 on 08-08-2007 04:45 PM
Alex Shulg
3 Posts
0
August 9th, 2007 06:00