Unsolved
This post is more than 5 years old
9 Posts
0
6051
Firmware update is not sticking
I have 2 Seagate 450gb drives (model ST3450857SS) in a PowerEdge 2950 server running Windows 2008 R2 with a PERC5 raid card. The 2 drives are in a Raid 1 configuration and are in an optimal state. I run the update package Drive_Firmware_V38WK_WN32_ES68_A07.EXE to attempt to update the firmware on the drives from ES02 to ES68. I get "The update completed successfully" message and reboot. Unfortunately the drives are still at version ES02. What am i doing wrong?
osprey4
4 Operator
4 Operator
•
34.2K Posts
0
January 31st, 2014 10:00
Hi Claudio2,
I'm moving your message to the servers RAID forum for more help.
Good luck!