Unsolved
This post is more than 5 years old
11 Posts
0
20729
November 6th, 2015 06:00
H710P KABLO NUMARASI
Merhaba ,
R720 2.5 ınc perc h310 kartı h710P (kodu 7GCGT) ile değiştirdik.
Yeni aldığınız kablo kodu Y1MGK aldık fakat sisten çalışmasına rağmen kablo kısa geldi.
Daha uzun kablo hangisi olabilir acaba ?
Teşekkürler.
0 events found
No Events found!
Daniel My
12 Elder
•
6.2K Posts
0
November 6th, 2015 11:00
Hello
I don't fully understand what your issue is. I think you are trying to connect an H710 to an X8 2.5" backplane and the cable you are using is too short.
Y1MGK is used in a dual 2.5" x8 backplane configuration. That is the cable used for the closest backplane. I think you need cable MJCP4. That is the cable for the x8 2.5" backplane that is further away. It is the longer cable.
Thanks
ayhanerbil
11 Posts
0
November 8th, 2015 22:00
merhaba
doğru düşünmüşsünüz ama MJCP4 kablonun uçları değişik bana Y1MGK nın daha uzun olanı lazım.
bu kablonun bir ucu tekli
uzunluk bu kadar olması lazım.
ayhanerbil
11 Posts
0
November 9th, 2015 06:00
Bu kablo işimizi görür mü acaba ?
MPXC8 kodu.
Daniel My
12 Elder
•
6.2K Posts
0
November 13th, 2015 08:00
I'm not able to locate the cable you are looking for.
The R720 only supports 1 H710/p adapter card. If you are running dual PERCs then you should have an adapter and a mini PERC. The cable part number I provided is intended to be used with the H710 mini. If you are running dual adapter type PERCs then you are running a configuration we have not validated. I do not have a backplane cable listed for that configuration.
Thanks