Unsolved
This post is more than 5 years old
2 Posts
0
24851
April 2nd, 2006 06:00
Help withresolving failed Logical Drives on a Poweredge 2600
Good Afternoon,
I have a Poweredge 2600 which up to recently hasn't missed a beat but on placing it into a new server rack today it has suddenly failed to boot up with the following message appearing:
PowerEdge 2600
Embeded Server Managmeent Firmware revision 1.74
Primamry backplane firware revision 1.01
Peripheral backplane firmware revision 1.01
Two 1800 MHZ processoes; bus speed 400 MHZ, L2 Cache: 512 KB
Perc. 4/Di RAID Controller BIOS
Version 1.06 July 2003
Copyright (C) LISLogicCorp
HA-O(Bus8 Dev8) Perc4/Di
Standard FW 2.48 DRAM=128MB
Battery module is present on adaptor
Following SCSI ID's are not responding
Channel - 0:1
2 Logical drives found on host adaptor
2 Logical drives failed
2 Logical drives handles by BIOS
No PXE Capable device available
If anyone could point me in the right direction in regards to rectifying this situation it would be appreciated.
Kind Regards,
Queenslander
No Events found!
DELL-GaryS
777 Posts
1
April 3rd, 2006 19:00
Hi Queenslander,
Well what you do is select ctrl m to get into the controller BIOS, go to objects, physical drives and force all the drives online, (checking to see that none had media or other errors...). save and reboot, should come right up, btw you should enable the alarm... the thing should be beeping 3 seconds on, 1 second off for a failed array. I'm assuming all the drives were online before you moved it.
Should be an easy fix.
Queenslander
2 Posts
0
April 3rd, 2006 20:00
Thanks Gary,
Much appreciated - back up & running.
Kind Regards,
Queenslander
Anonymous User
1 Message
0
March 8th, 2015 15:00
Thank dude
Picasso Albo
4 Posts
0
April 2nd, 2018 12:00
Unable to do so, a corresponding message states that only configured drives may be forced online. However, during configuration, the original error "Drives not responding, cannot be selected" pops up.