Unsolved
This post is more than 5 years old
3 Posts
0
1181
November 7th, 2017 05:00
PercS100 controller not reading Virtual drive with CentOS7 in PowerEdge R220II server
Hi,
Please help me with this:
Perc S100 controller not reading Virtual drive with CentOS7 in PowerEdge R220II server
-- I have created the virtual drive with two Sata drives
-- During OS installation system is showing only physical drives. It's not showing the virtual drive that I have created.
With CentOS it's supporting RAID configuration..
0 events found
No Events found!
DELL-Chris H
Moderator
•
9.7K Posts
0
November 7th, 2017 07:00
Pulkit.Garg,
The issue is that the S100 doesn't support Linux based OS's. As seen on page 15,16 of the manual here, it is a Windows driver based software controller. You could upgrade to something like the H200 (part 0RR9J).
Hope this helps.
theflash1932
9 Legend
•
16.3K Posts
0
November 7th, 2017 08:00
Disable the S100. I suggest you never use the S-series controller, even for Windows, as it is garbage.
pulkit.garg
3 Posts
0
November 7th, 2017 20:00
Hello Chris,
Thanks for the confirmation..
This helps...
pulkit.garg
3 Posts
0
November 7th, 2017 23:00
Hello Chris,
For the Linux based OS, what we need to add additional here?
Can u suggest some additional SATA RAID card through which this can be supported?