Unsolved
This post is more than 5 years old
8 Posts
0
1448
Power edge 840 not recognizing hdds.
So i have a power edge 840 . I have 2 Hard Drives connected. they are both 80GB. I try to install windows server 2008 standard. it wont's let me install windows server 2008 because it says it won't recognize the hard drives. I look at that hard drive folder (tru windows's windows server 2008 disk) And i see that windows is installed on one of the hard drives. Then I try to boot up windows but it just says. '' Invalid boot.INI file'' then '' booting from c:\windows\'' and then '' NTDETECT fail '' And then it does nothing. If you press a key on the keyboard it will just reboot the server. it was amazing.I din't like this. i reinstalled windows server 2008 standard. NOTHING. All my members that are part of this server group are counting on me. Please Please help me.
theflash1932
9 Legend
9 Legend
•
16.3K Posts
0
August 2nd, 2016 22:00
Which RAID controller do you have?
If you have the PERC 6/i, then you must FIRST configure/initialize RAID. NO disk will be presented to the OS until you do.
velevoYT
8 Posts
0
August 4th, 2016 10:00
I already did that. And it still does not work.
theflash1932
9 Legend
9 Legend
•
16.3K Posts
0
August 4th, 2016 12:00
Which controller?
velevoYT
8 Posts
0
August 5th, 2016 16:00
Oh ya I removed the raid controller. So ya....
theflash1932
9 Legend
9 Legend
•
16.3K Posts
0
August 6th, 2016 16:00
ha ha ... ok
velevoYT
8 Posts
0
August 11th, 2016 16:00
I'm serious
theflash1932
9 Legend
9 Legend
•
16.3K Posts
0
August 11th, 2016 16:00
Sure taking it out is one way to do it ... so I laughed.
Need details to help further.
velevoYT
8 Posts
0
August 17th, 2016 16:00
Yes
theflash1932
9 Legend
9 Legend
•
16.3K Posts
0
August 17th, 2016 21:00
Do you need/want assistance?
velevoYT
8 Posts
0
August 18th, 2016 22:00
yes