This post is more than 5 years old
3 Posts
0
45705
PowerEdge R210
Hi! I want to install windows 10 at my PowerEdge R210 but when I try it can not see the disks, drivers missing! Where can I find drivers for windows 10 to be installed? Thank you!
This post is more than 5 years old
3 Posts
0
45705
Hi! I want to install windows 10 at my PowerEdge R210 but when I try it can not see the disks, drivers missing! Where can I find drivers for windows 10 to be installed? Thank you!
Top
theflash1932
7 Technologist
7 Technologist
•
16.3K Posts
0
December 30th, 2015 08:00
No client OS (Windows XP/V/7/8/9/10) is supported on any Dell server. That ONLY means that Dell does not develop and test drivers to run those OS's. That doesn't mean it won't work ... it probably will ... but it is entirely up to you to try and troubleshoot. In most cases, you can use the drivers for the Server equivalent of the Windows version.
Server 2003 = XP
Server 2008 = Vista
Server 2008 R2 = W7x64
Server 2012 = W8x64
Server 2012 R2 = W8.1x64
Server 2016 = W10x64
theflash1932
7 Technologist
7 Technologist
•
16.3K Posts
0
December 28th, 2015 12:00
There are no Windows 10 drivers for the R210.
theflash1932
7 Technologist
7 Technologist
•
16.3K Posts
0
December 28th, 2015 12:00
You could try the 2012 R2 drivers for any devices that aren't recognized natively. Some RAID/storage controllers cannot be used in non-RAID mode ... you may need to configure RAID (or non-RAID/volume) before Windows can see any drives, even with the right drivers.
If you are using the S100 or S300 controllers, they will NOT work with Windows 10. You will need to either disable onboard RAID (S100) or remove the S300 card.
nkik66
3 Posts
0
December 30th, 2015 04:00
How about windows 8.1?
nkik66
3 Posts
0
December 30th, 2015 13:00
Tank you very much, I will try W7x64!