Moderator

 • 

9.7K Posts

March 11th, 2015 10:00

Kenny_G1892,

With the T310, with SATA, technically the 6TB drive hasn't been tested, but there isn't a current limitation. Currently the largest we offer for the T310 is a 4TB drive. I would say that it should work, but remember that with certain OS's, there is a 2TB limitation.

1 Message

January 5th, 2016 03:00

I'm looking to replace my hard drives, I have the PRINTED WIRING ASSY, CONTROLLER, PERIPHERAL COMPONENT INTERCONNECT EXPRESS , SERIAL ATTACHED SCSI, PERC6/I, ADAPTER and 4 hard drives connected to it, I'd like to install 4 x 6Tb HDD and using the Raid controller mirror 2 drives, giving me a total of 12Tb storage mirrored on the other two drives. The operating system is SBS2011.

Will this work?

2 Posts

October 12th, 2017 06:00

Did you guys ever try this?

 I have a customer with a t310 and they want to put two 6tb drives in raid 1 in it.

Thanks! J

2 Posts

October 12th, 2017 10:00

Are you saying that because of the OS?  It is Server 2008 R2 so it supports larger with GPT.  The guy in the second post says they offer a 4TB for this server.  Is that not accurate?

Thanks for the reply,  J

9 Legend

 • 

16.3K Posts

October 12th, 2017 10:00

2TB is the hard maximum disk size for the PERC 6/i.

9 Legend

 • 

16.3K Posts

October 12th, 2017 12:00

Are you saying that because of the OS?  It is Server 2008 R2 so it supports larger with GPT. 

No. Windows can't use a disk larger than 2TB unless it is converted to GPT. Windows cannot boot a GPT disk unless installed in a UEFI enabled system.

The guy in the second post says they offer a 4TB for this server.  Is that not accurate?

Yes, you can use drives larger than 2TB in this server, BUT you have to have the right controller. The PERC 6 is supported in this server but is an older model. You need the H700 to use drives larger than 2TB.

Just don't use desktop or NAS drives in servers.

1 Message

June 4th, 2018 09:00

Chris, I know this is an old thread but I am in a similar situation - I need to upgrade the disks in my T310 server.  You mentioned that Dell offers larger (2TB, 4TB) HDDs for the T310 but I have not been able to find anything but the original equipment 1TB drives on the Dell site. First I want to ask if my configuration would support larger drives and then could you supply a link to those drives?  Here is my config:

P/N Description Qty
224-6556 PowerEdge T310 Chassis with up  to 4 Hot-Plug Hard Drives and  LCD Diagnostics 1
330-5399 PERC 6/I Cable for Hot Plug Ha rd Drive 1
341-6175 PERC6i SAS RAID Controller Internal  with Battery 1
330-5342 SATA Optical Drive Cable for P owerEdge T310 1
317-5137 16GB Memory (4x4GB), 1333MHz, Dual Ranked RDIMM 4
330-5111 Power Supply, Redundant, 400W 2
313-9100 16X DVD-ROM,SATA, INTERNAL 1
342-2098 1TB 7.2K RPM Near-Line SAS 6Gb ps 3.5in Hot-plug Hard Drive 3
342-2078 300GB 15K RPM SAS 6Gbps 3.5in Hot-plug Hard Drive 1
317-2045 X3440 Xeon Processor, 2.53 GHz 8M Cache, Turbo, HT 1
313-8398 iDRAC6 Express 1
421-5256 MICROSOFT Small Business Serve r 2011, Standard, Factory Inst alled 1
330-5114 PowerEdge T310 Heatsink 1

 

Thank you in advance for your help.

1 Message

July 19th, 2019 08:00

I have a 2 x 6TB SATA HDD and I put it into a Dell T300 SERVER but it dosn't work. I want to use RAID 1 but the RAID 1 it says that SATA is 2TB What can I do Please help in this issue
No Events found!

Top