Unsolved
4 Posts
0
319
January 23rd, 2021 10:00
PowerEdge T610 Integrated RAID exception Detected
We have a PowerEdge T610 it is configured as a RAID 1, Thursday evening everything was fine, Friday Morning machine was in a constant reboot. We have a Hard Drive in slot 0 that has a green status light blinking, and a Hard Drive in slot 4 that is blinking green and amber.
Attached is a picture of the error received during bootup. My thought is that the Drive in slot 4 is going / has gone bad?
Our Operating System is Server 2012r2. I cannot get it to load and of course the backup tape has not been changed out in sometime, so I do not have a current backup of the system. Any help would be greatly appreciated.
No Events found!
DELL-Shine K
4 Operator
•
3K Posts
0
January 24th, 2021 17:00
You can check hard drive LED indicator details from below link (Refer section "Hard-Drive Indicator Patterns for RAID" on page 18). Blinking green and amber looks like a predictive failure. Can you go to controller configuration utility and check status of virtual disk and physical disks?
https://downloads.dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_poweredge/poweredge-t610_owner%27s%20manual_en-us.pdf