The drives look good. The RAID looks good. Windows Server 2003 hangs on acpitbl.dat and reboots. (It was rebooting on crcdisk.sys but now it goes a couple of files further.) Is there a way to run a Windows repair from the Dell Reinstallation CD? We have that.
Or will a repair cause more problems than it resolves? Booting from the Dell CD, it wants to do an install and is looking for the drivers. What should our next steps be?
DELL-Shine K
4 Operator
•
3K Posts
0
October 4th, 2021 20:00
Can you go to PERC BIOS Configuration utility (Press Ctrl + M while prompted during boot) and check status of virtual disk and physical disks?
3viscerator
2 Posts
0
October 5th, 2021 10:00
The drives look good. The RAID looks good. Windows Server 2003 hangs on acpitbl.dat and reboots. (It was rebooting on crcdisk.sys but now it goes a couple of files further.) Is there a way to run a Windows repair from the Dell Reinstallation CD? We have that.
Or will a repair cause more problems than it resolves? Booting from the Dell CD, it wants to do an install and is looking for the drivers. What should our next steps be?
DELL-Shine K
4 Operator
•
3K Posts
0
October 8th, 2021 23:00
If you are trying to install windows 2003 and need device driver for PERC 4e/Di, you can download it from below link
https://www.dell.com/support/home/en-us/drivers/driversdetails?driverid=kjvdt&oscode=wnet&productcode=poweredge-2800