Unsolved
This post is more than 5 years old
3 Posts
0
19909
September 11th, 2015 03:00
Poweredge r420 replacement disk in raid 5
I have a raid 5 array with three SAS disk if I can not find the same with what I can replace him
The drives are 300GB SAS 15k 3.5 "
No Events found!
jkj980
3 Posts
0
September 12th, 2015 04:00
OK thanks,
These three options are you to replace broken in the raid 5 array. If someone is not telling me please. Which of the three would you recommend.
300 GB 15K RPM SAS 6Gbps 2.5in Hot-plug Hard drive, 3.5 HYB CARR, 13G
theflash1932
11 Legend
•
16.3K Posts
0
September 12th, 2015 15:00
Except for the first one that is 12Gbps, versus 6Gbps on the others, there is no difference. You need EITHER a 2.5 inch drive in a hybrid/3.5 inch carrier or a 3.5 inch drive in a regular 3.5 inch carrier.
jkj980
3 Posts
0
September 13th, 2015 10:00
And the size ok.
The other three are 300GB is it necessary to take more than 300 GB or this will do for me.
theflash1932
11 Legend
•
16.3K Posts
0
September 13th, 2015 14:00
All three descriptions are for 300GB drives. If you are replacing a 300GB drive, 300GB or larger will probably* be fine.
(*There is a small possibility that different makes/models of drives may vary by a few MB, in which case, if you end up with a 300GB that is a few MB smaller than the original 300GB drive, it cannot be added to the array.