5 Posts
0
1157
June 16th, 2021 13:00
R230 windows installation problem with raid1
When I raid1 on the R230, the device does not see the disks on the windows setup screen. When I delete the raid, I canı install windows. In OS Deploy, the device does not switch to windows installation after restarting. Enters the lifecycle.
I will be glad if you help. Thanks.
No Events found!
Batu.
5 Posts
0
June 21st, 2021 22:00
Hi, I installed with CD.
Thanks for your help.
DELL-Erman O
Moderator
•
3K Posts
•
14.9K Points
0
June 16th, 2021 23:00
Hi, probably you need to show S130 drivers for Windows, please try to use this driver on installation screen.
PERC S130 W2K12R2 driver https://dell.to/3guAOjA;
İnstalling drivers https://dell.to/35tX32R
DELL-Young E
Moderator
•
5.4K Posts
•
37 Points
0
June 16th, 2021 23:00
Hello, thanks for choosing Dell. Which RAID controller was RAID 1 configuration on your R230, could you tell us?
Batu.
5 Posts
0
June 16th, 2021 23:00
Hi,
Raid Card S130
Batu.
5 Posts
0
June 17th, 2021 00:00
Hello,
I threw the driver file of the S130 into the installation Flash memory, but unfortunately it gives an error as in the attachment.
DELL-Erman O
Moderator
•
3K Posts
•
14.9K Points
0
June 17th, 2021 01:00
Hi, If you create VD as recently and chosen full initialization you need to wait to complete it. Apart from that, please check your boot options and SATA settings, and your installation media(for example prepared as UEFI). Please check RAID mode on or AHCI which one is selected and changing also check sata setting BIOS or UEFI changing and try it again.
Batu.
5 Posts
0
June 17th, 2021 03:00
Hello,
I tried all mods but the result is the same.
DELL-Erman O
Moderator
•
3K Posts
•
14.9K Points
0
June 17th, 2021 04:00
Hi, that's odd. Can you try to install with LCC by choosing to configure RAID first option as below article? How to install the operating system on a Dell PowerEdge Server? (OS deployment) https://dell.to/2SyGf8g;
please aware of check firmwares are up to date for iDRAC and OS driver pack
OS driver pack version 18.12.04 https://dell.to/3iOgrQ8;
iDRAC 2.80.80.80 https://dell.to/3zIXPqO
You can update firmware using LCC or iDRAC
with LCC https://dell.to/3cPoMz1
with iDRAC https://dell.to/3j1n81t
Also please check how to create bootable USB device https://dell.to/3zwRpuE;