Browse Community
Help
Log In
Solved!
Closed
MTInter
1 Rookie
•
28 Posts
0
699
May 25th, 2023 10:00
Responses(7)
Solutions(1)
Origin3k
4 Operator
2.4K Posts
May 27th, 2023 01:00
The SKUs (CustomerKit) are for the low profile cards.
Regards,Joerg
DELL-Young E
Moderator
5.4K Posts
May 25th, 2023 23:00
Hello if you mean this
Quad SFP+
All I see is this one below (and low profile type I’m afraid…)
Part #:VF81P
Part Desc.:CRD,NTWK,INTL,OCP3,10G,4P,SF+
OCP(Open Compute Project) card
https://dell.to/3OY2Plx
Hello
Thanks for getting back.
We require it PCIE. If quad port PCIE is not available can we connect x2 same network cards SFP dual port to the riser ?
Hello,
normaly "FC" means FibreChannel which is 4,16,32 or 64Gbit Speed. Because of that 16-64Gbit only single or dual Port HBAs exists.
Because you speak about 10G do you mean an SFP+ (10G) or SFP28(10/25)Gbit Ethernet HBA?
Hint: Please think about when there is a need of SMF or MMF because of needed Transceiver and using SFP+ LR within SFP28 is not well supportet.
May 26th, 2023 00:00
Thanks for this. Would require the below in Low Profile. Can you please advise SKU ?
DELL-Joey C
4.1K Posts
May 26th, 2023 01:00
Hi @MTInter,
Unfortunately, there isn't any Low Profile form for this particular card. You may refer to this DPN# and SKU. To be safe, please contact the sales support to confirm the availability of this card.
DPN# VK88G SKU# 540-BDDQ
May 26th, 2023 04:00
Hi,
unfortnatly there isnt a supportet low profile listet.... i assume that the phys. space for 4xSFP+ or heat expansion maybe is the limitation.
So you have to took the following options:
For both are CustomKit SKUs listet.
Dell Support Resources
View All
Top
Origin3k
4 Operator
•
2.4K Posts
0
May 27th, 2023 01:00
The SKUs (CustomerKit) are for the low profile cards.
Regards,
Joerg
DELL-Young E
Moderator
•
5.4K Posts
0
May 25th, 2023 23:00
Hello if you mean this
Quad SFP+
All I see is this one below (and low profile type I’m afraid…)
Part #:VF81P
Part Desc.:CRD,NTWK,INTL,OCP3,10G,4P,SF+
OCP(Open Compute Project) card
https://dell.to/3OY2Plx
MTInter
1 Rookie
•
28 Posts
0
May 25th, 2023 23:00
Hello
Thanks for getting back.
We require it PCIE. If quad port PCIE is not available can we connect x2 same network cards SFP dual port to the riser ?
Origin3k
4 Operator
•
2.4K Posts
0
May 25th, 2023 23:00
Hello,
normaly "FC" means FibreChannel which is 4,16,32 or 64Gbit Speed. Because of that 16-64Gbit only single or dual Port HBAs exists.
Because you speak about 10G do you mean an SFP+ (10G) or SFP28(10/25)Gbit Ethernet HBA?
Hint: Please think about when there is a need of SMF or MMF because of needed Transceiver and using SFP+ LR within SFP28 is not well supportet.
MTInter
1 Rookie
•
28 Posts
0
May 26th, 2023 00:00
Thanks for this. Would require the below in Low Profile. Can you please advise SKU ?
DELL-Joey C
Moderator
•
4.1K Posts
0
May 26th, 2023 01:00
Hi @MTInter,
Unfortunately, there isn't any Low Profile form for this particular card. You may refer to this DPN# and SKU. To be safe, please contact the sales support to confirm the availability of this card.
DPN# VK88G SKU# 540-BDDQ
Origin3k
4 Operator
•
2.4K Posts
0
May 26th, 2023 04:00
Hi,
unfortnatly there isnt a supportet low profile listet.... i assume that the phys. space for 4xSFP+ or heat expansion maybe is the limitation.
So you have to took the following options:
For both are CustomKit SKUs listet.
Regards,
Joerg