SSD Write Endurance not show on R710.

Hello,

I have a Dell R710 with 2 Dell SSD, I would like to monitor the write endurance but the omreport does not show.

The SSD is certified by Dell also.

Here the detail :

# omreport storage controller
Controller PERC H700 Integrated(Embedded)

Controller
ID : 0
Status : Non-Critical
Name : PERC H700 Integrated
Slot ID : Embedded
State : Degraded
Firmware Version : 12.10.4-0001
Minimum Required Firmware Version : 12.10.5-0001
Driver Version : 06.803.01.00-rh1

#omreport storage pdisk controller=0

ID : 1:0:5
Status : Non-Critical
Name : Physical Disk 1:0:5
State : Foreign
Power Status : Not Applicable
Bus Protocol : SATA
Media : SSD
Part of Cache Pool : Not Applicable
Remaining Rated Write Endurance : Not Applicable
Failure Predicted : No
Revision : AXM17D3Q
Driver Version : Not Applicable
Model Number : Not Applicable
T10 PI Capable : No
Certified : Yes
Encryption Capable : No
Encrypted : Not Applicable
Progress : Not Applicable
Mirror Set ID : Not Applicable
Capacity : 92.63 GB (99455336448 bytes)
Used RAID Disk Space : 0.00 GB (0 bytes)
Available RAID Disk Space : 92.63 GB (99455336448 bytes)
Hot Spare : No
Vendor ID : DELL(tm)
Product ID : MZ-5EA1000-0D3
Serial No. : S0SENEAC100259
Part Number : KR0DYW427423021C004BA0
Negotiated Speed : 3.00 Gbps
Capable Speed : 3.00 Gbps
PCIe Negotiated Link Width : Not Applicable
PCIe Maximum Link Width : Not Applicable
Sector Size : 512B
Device Write Cache : Not Applicable
Manufacture Day : Not Available
Manufacture Week : Not Available
Manufacture Year : Not Available
SAS Address : 4433221102000000
Form Factor : Not Available
Sub Vendor : Not Available

So what does miss here ? Plz consult.

Thank you so much.

Huy.