Thank you for your explanations. Would it be easier (I have limited knowledge regarding servers configuration) if I would go for 2TB instead of 4TB? Then, do you think that RAID1 performance on S100 would be acceptable? (We use the server in our small company as Domain Controller + Network File Server).
I mean, with RAID0 file transfer is OK, but I much degradation should I expect with RAID1: more than half speed or less?
The OS would need be considered. You don't list your OS, but looking at the support pages, it looks like the driver is integrated in with Windows. You can find driver and firmware downloads on the page below.
olki
3 Posts
0
June 27th, 2016 02:00
Hi Robert,
Thank you for your explanations. Would it be easier (I have limited knowledge regarding servers configuration) if I would go for 2TB instead of 4TB? Then, do you think that RAID1 performance on S100 would be acceptable? (We use the server in our small company as Domain Controller + Network File Server).
I mean, with RAID0 file transfer is OK, but I much degradation should I expect with RAID1: more than half speed or less?
Thanks.
Olivier
olki
3 Posts
0
June 28th, 2016 00:00
Thank you Robert, it is clear now.
Regards.
Kwame1711
2 Posts
0
May 26th, 2021 02:00
What must be considered before upgrading PERC H200 what specific driver are we looking for
Dell-DylanJ
4 Operator
•
2.9K Posts
0
May 26th, 2021 06:00
Good morning,
The OS would need be considered. You don't list your OS, but looking at the support pages, it looks like the driver is integrated in with Windows. You can find driver and firmware downloads on the page below.
https://dell.to/3voSbrf