This post is more than 5 years old
22 Posts
0
3592
Adding 2nd CPU to Dell PE2950
Hello,
I am getting a used Dell PE2950, service tag [ADMIN NOTE: Service Tag removed per privacy policy]. Originally, and still, this has one Xeon E5345 quad core processor. I'm going to buy another matching processor and heatsink, but I can't seem to find out how to mount the new heatsink to the motherboard. Is there a part number for the hardware to mount it? Is the mount built-in to the motherboard somehow, even on 1 CPU systems (I don't have it in hand just yet, will be picking it up Friday).
theflash1932
9 Legend
9 Legend
•
16.3K Posts
1
June 27th, 2012 13:00
Page 94 shows the procedure ... should be nothing extra needed:
http://support.dell.com/support/edocs/systems/pe2950/en/hom/pdf/hom.pdf
ticktocktech
2 Posts
0
June 27th, 2012 14:00
All you need is to drop in the CPU by matching the two notches on top, then put the heatsink on top and lock it in.
Selta
22 Posts
0
June 27th, 2012 14:00
Thank you everyone for your replies :)