Unsolved
This post is more than 5 years old
3 Posts
0
150523
August 31st, 2014 22:00
Dell PowerEdge 2900 Error E1000 failsafe E1227 Linear Powergrd Call Support
Dell PowerEdge 2900 Error E1000 failsafe E1227 Linear Powergrd Call Support, Due to this error , Server is not booting and no display .... and back end light show Amber. With a minute , all Fans from server stopped also CPU OFF.
We have diagnose using ,
1. one power supply and one ram,
2. power cable change.
But unfortunately now result show. Any help.....!
No Events found!
theflash1932
9 Legend
•
16.3K Posts
0
September 1st, 2014 06:00
Failsafe is a power-related issue and can be located anywhere along the chain of power - PSU, motherboard/PDU, backplane, cable, etc. Has the system been moved? Dropped? Hit? Exposed to water/chemicals? If not, check/reseat the power cables/connections inside. Remove everything, including the board, clean out the chassis, then put everything back. Typically Dell would replace everything if it were under warranty, so there is no particular one component at fault, but it is often the motherboard.