Unsolved
This post is more than 5 years old
5 Posts
0
14957
Dell Poweredge 1850 won't install OS
Hi, I am trying to install Win Server 2008 r2 Essentials. Upon DVD boot message pop: server installation cannot proceed because a primary hard drive is not detected.
I have initialised the disks (0 ,1) span 1 / RAID 1
I have also download drivers into flash drive (www.dell.com/.../drivers)
So far no luck
Need urgent help please
DELL-Chris H
Moderator
Moderator
•
8.8K Posts
0
July 15th, 2015 06:00
Newnawatech,
It does sound like the driver isn't being loaded. If you download and then boot to the Build and Update Utility ISO, it will load the raid driver for you. You can find the BUU ISO here.
I don't think the issue is with the drive or controller based on your descriptions. So this should get the install progressing.
Let me know how it goes.
.
theflash1932
9 Legend
9 Legend
•
16.3K Posts
0
July 15th, 2015 08:00
Did you RUN the driver file before putting them on the flash drive? Then click on Load Driver during Setup (it won't load them automatically).
newnawatech
5 Posts
0
July 15th, 2015 16:00
Ok thanks Chris. Will update soon
newnawatech
5 Posts
0
July 15th, 2015 16:00
Hi Chris / Flash1932
You guys are awesome
The disk drivers have been recognised from this URL:
http://downloads.dell.com/sysman/OSDRIVERSET_w2008sbs_64_6.5_3450.exe
Today I will continue with installation. One question: When I click next > Only one disk appears > named DISK 2. Is this correct as I had initialised disk in BIOS setup (CTRL + M) as RAID 1
Thanks
newnawatech
5 Posts
0
July 15th, 2015 16:00
Thanks for reply. Will update soon
newnawatech
5 Posts
0
July 15th, 2015 23:00
Ok thats great. Thanks
theflash1932
9 Legend
9 Legend
•
16.3K Posts
0
July 15th, 2015 23:00
With hardware RAID, you should only see the VIRTUAL disk, not the individual physical disks that make up the virtual disk. 2x300GB RAID 1 will be seen as one 300GB disk; 5x300 RAID 5 will be seen as one 1.2TB disk, etc.