This post is more than 5 years old
12 Posts
0
3931
Dell T610 - SLAT support?
Hi all,
I have a Dell PET610 which I use as a Hyper-V host. I'm looking into the possibility of using RemoteFX, but have checked the requirements for this technology and it mentions that Second Level Address Translation/Extended Page Table is required. I've checked the Intel website for the CPUs installed in the server (X5650) which says that they do support EPT. However, running SysInternals CoreInfo shows that the server does NOT support EPT.
Is there a BIOS option I need to configure to get SLAT/EPT enabled on the server. Virtualization Support is enabled already in BIOS.
TobyS7243
12 Posts
1
November 5th, 2017 05:00
Just to update for anybody else who may be interested - I've installed the GPU in the server and have successfully configured RemoteFX.
DELL-Josh Cr
Moderator
Moderator
•
8.5K Posts
0
October 30th, 2017 15:00
Hi,
We do not have a separate setting for it. Just having virtualization extensions enabled should be enough. You may want to make sure that the BIOS is up to date. http://www.dell.com/support/home/us/en/19/drivers/driversdetails?driverId=VX07C
TobyS7243
12 Posts
0
October 30th, 2017 16:00
Hi,
Thanks for the response. Server is already on BIOS 6.4.0. Anything else I can try?
TobyS7243
12 Posts
0
October 30th, 2017 16:00
Win Server 2016
DELL-Josh Cr
Moderator
Moderator
•
8.5K Posts
0
October 30th, 2017 16:00
What OS are you installing?
DELL-Josh Cr
Moderator
Moderator
•
8.5K Posts
0
October 31st, 2017 10:00
It may be because the Server 2016 is not a validated OS and there is something that doesn’t work properly. http://en.community.dell.com/techcenter/b/techcenter/archive/2016/11/10/dell-poweredge-servers-certified-for-windows-server-2016
TobyS7243
12 Posts
0
October 31st, 2017 16:00
Just to confirm, does the Hyper-V Hypervisor need SLAT to install under Server 2016? If so, this is a complete non-issue as Hyper-V is already installed...
DELL-Josh Cr
Moderator
Moderator
•
8.5K Posts
0
October 31st, 2017 17:00
Looks like it is required for Server 2016 https://docs.microsoft.com/en-us/windows-server/virtualization/hyper-v/system-requirements-for-hyper-v-on-windows
Mahi-BLR
1 Message
0
November 25th, 2019 10:00
Was there a requirement to install remote desktop services and have license for the RemoteFx to work ?