This post is more than 5 years old
17 Posts
0
154089
Dell UPS Rack/Tower 2700W HV
Hello
I currently have an Dell UPS Rack/Tower 2700W and I try to install the Dell UPS as :
- Real server which sends requests to stop
- Virtual servers that must stop before the central server.
I have a little trouble with the software interface, even with the help files user. So if someone has already done that, I'm interested.
regards,
AndyMcDonald
44 Posts
0
August 6th, 2012 06:00
Hi Everyone,
Just to let you know that Dell just released there is an r2 version of the "new" Dell UPS Management software just launched last week. The link is below:
http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats/Product/dell-line-interactive-tower-ups-1000t?DriverId=RV94V&FileId=2995429792&urlProductCode=False
And the userguides are available from:
http://support.dell.com/support/edocs/ACC/UPSD/en/ulnmug.pdf
http://support.dell.com/support/edocs/ACC/UPSD/en/mumcug.pdf
Some key upgrades are as follows:
Core improvements:
- Support for Dell Intelligent PDUs & their environmental sensors
- Support for redundant UPS configurations
- Force remote virtual machine shutdown for VMware HA clusters
- New plugin for XenCenter
- Agentless control of VMware (when used with vCenter) & Citrix (when used with XenCenter) hosts directly from MUMC console (no ULNM local agent installation required)
- Generation of alarm events and logs in vCenter console panel
And other improvements
- Removed pre-requisite of Perl SDK for MUMC (still exists for ULNM but that's part of the vMA pre-requisite anyway)
- Multi-language software & userguides (previously ensligh only)
- Opimization of database to handle larger installations
- Improved alarm logging, fault finding, alarm acknowledgement and event export.
- Improved reverse name resolution for nodes and computers
Hope this helps!
hotline22
17 Posts
0
December 20th, 2012 01:00
Hello,
Finally, i install the new software.
I have two UPS, how much should I put Redundancy Level : 0 or 1?
regards
Jason McDonald
1 Message
0
December 26th, 2012 10:00
Hi There, you would want to set the redundancy level to1 in this case. See pg. 73 in the Dell ULNM User Guide here for further information on this topic.
Thanks!