3 Posts
0
2688
E1229 Vcore Cpu 2 on a power edge r610
So I have this dell r610 server from 2011 and I have been using it ever since and now it randomly crashes and displays a E1229 error saying I have to reseat the cpu, once I did that it booted up like normal into VMware and I thought it was fine, but around 3 hours later it had crashed again. When I looked around the cpu socket no transistors (I have no idea what they are called) where damaged or burnt in anyway I have a 2 xeon e5620 cpus and they are getting upgraded to x5680 I have looked at other posts and they say to replace the motherboard but I have no idea if they cannot boot at all or like my situation it crashes after a couple of hours
DELL-Chris H
Moderator
Moderator
•
8.8K Posts
0
September 9th, 2019 05:00
I couldn't be certain, as there are several different motherboards listed for that server. If you Private Message me the svc tag, I can look deeper into it knowing the specific part number. Another option would be to contact Spare Parts at 1-800-357-3355.
DELL-Chris H
Moderator
Moderator
•
8.8K Posts
0
September 3rd, 2019 06:00
Jozef Bonnar,
While it could be an issue with the motherboard, I would look at a couple other things to test first. First would be to be certain the server is up to date on BIOS, iDrac and Raid controller. After that, if the error persists, then try taking the server to its minimum to post configuration. Minimum to POST is removing everything from the server, but the following devices;
•One power supply
•CPU1 (minimum for troubleshooting)
•System board
•Heat sink for CPU1 for prevention of overheating
•One DIMM for CPU 1
•Control panel
•Control-panel cable
•Riser card
Try powering up and test to see if error reappears.
Let me know what you see.
Jozef Bonnar
3 Posts
0
September 3rd, 2019 08:00
DELL-Chris H
Moderator
Moderator
•
8.8K Posts
0
September 6th, 2019 14:00
Jozef Bonnar
3 Posts
0
September 7th, 2019 07:00
They both work flawlessly in cpu 1 slot, How much do you think a motherboard is going to cost
Uptime: 3.95 days