Unsolved
This post is more than 5 years old
5 Posts
0
7443
Full Height H710 Cables
I have a R720 with 3.5" backplane and would like to upgrade the H310 controller to a full height H710 preferably in slot 6 or 7. What are the Dell part numbers for the cables and their lengths?
DELL-Chris H
Moderator
Moderator
•
8.8K Posts
0
February 11th, 2014 08:00
Kurt_M.
The cable for the H710 is part number 4NM23. I am not specific on its true length. Give me a moment to research that for you.
Also, the standard H710 isn't supported on this server. It would have to be a H710p full height.
Kurt M
5 Posts
0
February 11th, 2014 11:00
Hi Chris,
Thank you for your reply. It seems like the 4NM23 is described as R720XD Rear-BP-SAS-A1 to BP-SAS-A1 Backplane Cable. Will that cable work for H710p in slot 6 or 7 for both 3.5" front backplane connectors in a R720 (not XD)?
Regards,
-Kurt
DELL-Chris H
Moderator
Moderator
•
8.8K Posts
0
February 13th, 2014 11:00
Sorry the correct cable for the non XD version is the cable part number MX3P7
It is the cable assembly for the 3.5 inch chassis.
Swanbo
1 Message
0
April 18th, 2014 14:00
I'm looking at doing t he same thing. Does it matter if the 3.5" backplane is 4bay or 8bay ?