Unsolved
This post is more than 5 years old
14 Posts
0
11564
KVR1333D3D4R9S 8GB DIMMs OK in T110-II?
I want to upgrade my Dell T110-II server to 32GB of RAM. I "think" that the Kingston KVR1333D3D4R9S 8GB DIMMS should work, but I'm hoping someone can confirm that. The spec is here: http://www.kingston.com/dataSheets/KVR1333D3D4R9S_8G.pdf
When I use the system selector feature on Kingston's website it suggests KTD-PE313E/8G for the Dell T110-II. They're almost twice as expensive as the KVR1333D3D4R9S, but maybe the KVR1333D3D4R9S wouldn't work in my Dell T110-II ??
I'd appreciate any insight.
Best, Blake
theflash1932
9 Legend
9 Legend
•
16.3K Posts
0
September 12th, 2012 22:00
The T110 II takes Unbuffered (unregistered - called UDIMM's), according to the specs and the manual.
As far as I can tell, this is also a specification of the processor memory controller for the E3-1200, Pentium, and Celeron processors that are supported in the T110 II.
So, if you want to try Registered (called RDIMM's), then I would get the model that Kingston recommends, so you can send them back when they don't work.
Note that Crucial.com lists only UDIMM's:
www.crucial.com/.../listparts.aspx