Unsolved
This post is more than 5 years old
5 Posts
0
6731
M1000 and network pass-throughs
We have an M1000 which has 1G 16 port pass-throughs in the A and B fabrics and a FC module in the C fabric. My question is about network adapters. We have been getting conflicting information. Does a full height card get 8 network connections, 4 from the A fabric and 4 from the B fabric? Are all 8 interfaces available to the installed operating system?
sstins
5 Posts
0
December 11th, 2013 06:00
Listed on the parts list as part number WW060
Listed in CMC logs as
Dell Ethernet Pass-Through Gigabit Ethernet Present 30
DELL-Chris H
Moderator
Moderator
•
8.8K Posts
0
December 11th, 2013 06:00
Sstins,
You would need to clarify the specific passthroughs you are using. Do you have the part or model number. The reason I ask as they are all pretty different, so to be specific is why I ask.
Let me know what you find.
DELL-Chris H
Moderator
Moderator
•
8.8K Posts
0
December 11th, 2013 07:00
That is a 16port. You will have 16 ports on each fiber. Now the ports will alternate back and forth on the channels So 1a, 2b, etc.
Let me know if this helps.