Unsolved
This post is more than 5 years old
3 Posts
0
109415
Need info about Dell PowerEdge 1800 motherboard.
I have bought a Dell PowerEdge 1800 Server motherboard with CPU and RAM off Ebay. I have not able to find any information on were to put the wires for the start button, reset button, etc. I am putting this board into a generic server case. Can anyone help me?
theflash1932
9 Legend
9 Legend
•
16.3K Posts
0
January 16th, 2016 08:00
Because there is often more coming in than just the power button (status, identify, ESM LCD, etc.), you may be looking for a non-standard connector. May need to use some clever wiring to get it to work. If you are building your own server, why go with a PE 1800 board?
dcmd_8040
3 Posts
0
January 16th, 2016 10:00
Because I found this board on ebay for $10. It included one processor and one gig of RAM. Thought it was a really good deal. I can probably experiment and try to guess just worried about damaging the board.