Unsolved
This post is more than 5 years old
2 Posts
0
1314
No Post, No Video, No Codes
I have a T110 ii that rebooted from Windows updates on Friday night as scheduled. On reboot the server did not come back up.
I have complete the following steps:
- Power cycled
- Hardware reset by unplugging power cord and holding power button for 30 seconds
- Reseated RAM, CPU, RAID Controller, HDD and PSU connections
- Pulled and tested CMOS battery, good
- Minimum hardware boot, CPU, 1 stick of RAM, all other hard was disconnected
- Verified VGA cable is good
- Reset NVRAM
- Boot without RAM, no error codes or beeps
I can ping IDRAC but when connecting via browser page will not load. I am leaning towards a failed CPU for that reason. Does anyone have any additional input?
dk6143
2 Posts
0
June 26th, 2016 16:00
No video, no BIOS splash screen, fans spin up and stay on. Other than power only VGA was connected.
DELL-Daniel My
Moderator
Moderator
•
6.2K Posts
0
June 26th, 2016 16:00
Hello
What exactly is happening? Are you getting a BIOS splash screen? Are you getting any video? Are the fans spinning up?
I would make sure that you disconnected external devices as well, like USB thumb drives and mouse/keyboard.
I would suspect a system board issue, but any component that is still in the system when you are at minimum-to-POST could be the cause of the issue.
Thanks