PowerEdge Hardware General
Posts
Unsolved
This post is more than 5 years old
15 Posts
0
2101
October 11th, 2012 01:00
PERC 4/Di RAID 5 Parameters
What does the category "#Stripes" indicates? For example #Stripes is 3.
Responses(4)
No Events found!
Unsolved
This post is more than 5 years old
15 Posts
0
2101
What does the category "#Stripes" indicates? For example #Stripes is 3.
Top
DELL-Chris H
Moderator
Moderator
•
8.8K Posts
0
October 11th, 2012 07:00
Romy,
#Stripes – The number of stripes (physical drives) in the associated physical array.
To confirm, is the array in question a 3 drive raid 5?
romy_punzalan
15 Posts
0
October 11th, 2012 08:00
On the view, LD=0, RAID 5, #Stripes 3, But there are 4 HDD inserted. HD0 Ready, HD1 Online, HD2 Online & HD3 Online. Why is HD0 Ready? Does it included in the RAID 5?
romy_punzalan
15 Posts
0
October 11th, 2012 08:00
To confirm, is the array in question a 3 drive raid 5? YES
DELL-Chris H
Moderator
Moderator
•
8.8K Posts
0
October 11th, 2012 11:00
It sounds like it isn't part of the existing array. What is the status of the array? If Optimal then go to VIEW/ADD CONFIGURATION, then PHYSICAL DISKS. What is showing for that drive? Is it the hotspare?
The #stripe is defining the members in the array, not the server.