2 Intern
•
360 Posts
0
1259
Partition Failure - Could not find where the dynamic partition was mounted
Howdy,
I'm trying to get an R430 updated with Bios, Firmware, etc. I ran the SUU and that updated most things except the BIOS update failed. I then tried downloading the manual BIOS install file and that also failed. I did a Racreset, as that was recommended by someone, but it didn't help. Have also tried rebooting which also didn't help.
I didn't try updating from the Lifecycle Controller but I guess I'll try that now if I can remember how that works.
It's trying to update from 2.9.1 to 2.15.0
Just wondering what else I can try to get this working.
Thanks!
DELL-Shine K
4 Operator
4 Operator
•
3K Posts
1
August 12th, 2022 08:00
Can you try to update BIOS using iDRAC. You can upload Windows DUP package to iDRAC to update it. You can refer below link for details.
https://www.dell.com/support/kbdoc/en-in/000134013/dell-poweredge-update-the-firmware-of-single-system-components-remotely-using-the-idrac
kelemvor33
2 Intern
2 Intern
•
360 Posts
0
August 12th, 2022 12:00
Thanks. That seemed to do the trick.