Unsolved
This post is more than 5 years old
5 Posts
0
11300
Post code 63 Dell C6100
Hello,
I have a motherboard of dell C6100 with this configuration:
2*L5520
6*2Go PC3-10600R
When i put on the motherboard, i have acces to the ipmi (megarac) but i haven't anything on the screen, no boot, not bios.
I have on the MB a code with led : 63.
have you an idea?
Thanks.
DELL-Chris H
Moderator
Moderator
•
8.8K Posts
0
September 24th, 2014 13:00
Gizmo150,
What I would look at first is the slots the dimms are being installed in. With using only six dimms you will need to populate the Dimm 0 slot on channel A B and C. So that would be populating ONLY the slots with the white tabs. Is that the slots you were using?
If so then could you let me know the specific part number and I can check compatibility. Also could you confirm the BIOS and iDrac revision as as well?
Let me know.
gizmo150
5 Posts
0
September 25th, 2014 01:00
Hello
First, thanks for the answer!!
Yes i use the white blank first with 6 dimms.
Information about the motherboard:
CN-0D61XP-74751-075-0335-A00
SN: VL07MP1037 R
REV A03 DATE 073
DP/N D61XP
About the dimms:
hynix 2GB 2Rx8 PC3-10600R-9-10-B0 HMT125R7TFR8C-H9 T2 AB
i can test with other Nanya dimms but i haven't the ref here.
thanks
gizmo150
5 Posts
0
September 28th, 2014 07:00
Please don't leave me alone !! :D
DELL-Chris H
Moderator
Moderator
•
8.8K Posts
0
September 29th, 2014 05:00
What is the BIOS revision on the server? Also, if you access the BIOS (F2) and then go to the Memory Settings and then to Memory Mode, is it set to Optimizer?
Let me know.
gizmo150
5 Posts
0
September 29th, 2014 09:00
i haven't anything on the screen!! and the remote console, i just have acces to the ipmi thats all.
thanks for the help! :)
gizmo150
5 Posts
0
September 29th, 2014 09:00
i haven't acces to the bios.
i have acces just to the ipmi, but if the bios is specified in it, i can tell you.
DELL-Chris H
Moderator
Moderator
•
8.8K Posts
0
September 29th, 2014 09:00
When you reboot and see the Dell splash screen, do you see a prompt for hitting F2 for System Services?