Unsolved
This post is more than 5 years old
4 Posts
0
1640
Power Edge T110 - Dell PERC H200 Adapter - New Raid-1 Issue
High to all.
My Server has a Raid-1 with two 1TB SAS Disks in the PERC H200 Controller.
Today i got two SATA 1Tb disks and i create a new Windows Volume with Drive Letter D. (Now it is still initialize the new Partition D) I want to transfer all the data from partition C: to the New Partition D: without loosing any Data. After the transfer (Copy) i will start the server from the D: Partition (It will be the new startup Volume)
I include a photo to see the two Partitions.
Can someone advice me a program to use to do the transfer? Is any way from the Dell Manager to do this?
Thanks
theflash1932
9 Legend
9 Legend
•
16.3K Posts
0
July 18th, 2017 11:00
There are lots of free ones like EaseUS Disk Copy and Clonezilla. There are other paid software, like Acronis.
theflash1932
9 Legend
9 Legend
•
16.3K Posts
0
July 18th, 2017 11:00
No, there is no Dell tool to do this. You CANNOT simply copy the data from one disk to another. You need to either do a full backup of C: and restore to D: (which will then become C:), OR you need to do a clone from one to the other. The letter "D" means nothing during this process - you can delete it, then clone from the existing "disk" to the new/empty "disk". ("Disk" refers to the disk seen in Disk Management, which is the virtual/logical drive created by the RAID controller.)
gsiomos76
4 Posts
0
July 18th, 2017 11:00