Unsolved
2 Posts
0
4806
Power Edge T430 as Workstation with NVIDIA Quadro P2000
Hi. All,
I do GIS analysis, and I've had my eye on this T430 for a while now with spec :
2 x Intel Xeon E5-2023 v4 1.7GHz, 15M Cache, with Turbo Boost
16 GB RDIMM, 2400MT/S, DDR4, Dual Rank x4
Dual Hot Plug Redundant Power Supply (1+1) 495 W
Chassis with up to 8, 3.5" Hot Plug Hard Drives and Embedded SATA, Tower Configuration
I plan to investment on it and put NVIDIA Quadro P2000 graphics card. Is it possible?
theflash1932
7 Technologist
7 Technologist
•
16.3K Posts
0
July 23rd, 2018 09:00
There is a good chance you won't get the R430 working with that graphics card. It is not designed for high-end graphics and there are no cards that have been validated on it. It may work, but probably not. A server is not the best option for what you describe it being used for ... Dell has the Precision Workstations for that.
ElCoyote_
63 Posts
0
August 27th, 2018 11:00
I run a T430 as a workstation and I could never get a 85W graphics card to even allow the server to boot.
In the end, a decent 45W NVidia card worked very fine.
Hendrawar
2 Posts
0
September 3rd, 2018 07:00
Thank you for your response @ElCoyote_. I just installed this graphics card yesterday. I working but it seem like no so stable because it just work at port no 3 and sometime it not working at all. I still try to figured out some alternative setting. Maybe I will also try the 45 W NVidia. Thank you
akulbe
11 Posts
0
February 23rd, 2019 15:00
Which card did you end up getting, that worked? And also, did it require any configuration change to the EFI/BIOS to get it working?
Thanks!
apexipaul
4 Posts
0
April 20th, 2019 05:00
hi all
I got Quadro K4000 to work in slot 4. no issues. Your power supply should have the 6pin GPU Socket.
You can get a cert GPU (AMD W7000)
thak123
6 Posts
0
May 11th, 2020 03:00
Hi will it work with Nvidia RTX 2080?