Power Edge replacement for DL2200

Hello

You can find support information on the MD1200 support page. The manual section has a support matrix document. You can also find information on our PERC page.

http://www.dell.com/perc/

http://www.dell.com/support/

11th generation servers with the PERC H800 are end of life and no longer supported. 13th generation and later servers validated for the H810 controller have support limitations because the H810 isn't fully supported on 13th generation and later servers. The best option would likely be a 12th generation server with an H810.

Thanks

Are those 12th gen still available for purchase new?

OR is there a 13th generation server that will control the MD1200s?  If so which Perc would handle a MD1200?

I don't think we sell 12th generation systems new any longer. I don't show them available on the website, a sales representative has access to more items than are listed on the site. You can contact a sales rep to verify whether or not they are available.

Yes, it will work with 13th generation servers but with limited support. The newest PERC supported by the MD1200 is the H810. The oldest PERC that is supported on 13th generation servers is the H810. The H810 is not fully supported on 13th generation servers though. You will need to perform management tasks directly through the controller BIOS. The controller is not supported for management through management applications within the host OS.

A 13th generation server with an H810 would be the only supported configuration that you can purchase new as far as I know.

Thanks