Start a Conversation

This post is more than 5 years old

Solved!

Go to Solution

12703

November 1st, 2017 08:00

Power cable from riser to GPU

Hi,

I'd like to connect a GPU to my PE T430, and need power from the riser (photos attached). Which part number do I need please? 

Thanks,

Viv

1 Attachment

13 Posts

November 2nd, 2017 17:00

Hi Joey,

Tried with an N08NH cable from a T630, works flawlessly!!! Back in action now.

Thanks,

Viv

Moderator

 • 

3.4K Posts

November 2nd, 2017 00:00

Hi David,

You would probably looking for this P/N# DRXPD.

1 thing that I'm unsure is about the GPU that you're installing. As this GPU is not listed on Dell's tested GPU, therefore it's unsure it might work. But do let us know if the GPU works fine, so we can put this thread for good working GPU on T430.

13 Posts

November 2nd, 2017 05:00

Hi Joey,

Thanks, I'll take a look. 

RE: the GPU - this works flawlessly on a PE T420 with a SilverStone SST-PP06B-PCIE55 (from Amazon UK), so I assumed (and sincerely hope) it will work on the T430. It hasn't so far and tells me to connect the correct power, thus my open thread about the cable to use.

I'll let you know if this works.

Thanks,

Viv

No Events found!

Top