Power monitoring on r610

Hi,

I have two sets of r610s.  One set has single high-output power supply (~700W) and the second set has the energy efficient power supply (~520W).

OMSA gives the instantaneous power consumption on the first type, but not on the second type.  I does show instantaneous current (Amps) usage, but this is a less precise value (0.1A is 20W).  Both sets have the same OMSA and firmware versions.

[root@localhost ~]# omreport chassis pwrmonitoring

Power Consumption Information

Power Consumption

Index             : 1

Status            : Ok

Probe Name        : System Board System Level

Reading           : 133 W

Warning Threshold : 917 W

Failure Threshold : 966 W

Amperage

Location : PS 1 Current 1

Reading  : 0.6 A

The 133W is the power used by the node (it is idle).