Unsolved
This post is more than 5 years old
11 Posts
0
213154
PowerEdge R730 Fatal error on bus
Hello everyone,
my poweredge server freeze on these errors :
A fatal error was detected on a component at bus 0 device 1 function 0.
A fatal error was detected on a component at bus 3 device 0 function 0.
It randomly happens. I can connect to my vsphere and manage my VM but sometimes, it freeze on purple screen.
what can i do.
I'm using ESXi : VMware-VMvisor-Installer-5.5.0.update02-2068190.x86_64-Dell_Customized-A00.iso
Thanks you in advance
DELL-Chris H
Moderator
Moderator
•
8.8K Posts
0
January 20th, 2015 11:00
Btridon,
It appears the issue may reside with the Perc Controller and possibly the Network Daughter Card, to confirm would you locate the LSPCI folder in Vm Support, and it will identify the 0:1:0 and 3:0:0 devices specifically. After that would you power down and remove Riser #1 and 2 (if installed) and reseat the raid controller and NDC that is installed. You can locate that next to the power supplies, as well as next to the Dual SD module. After that then restore the risers and see if the error persists.
Also, I would strongly suggest updating the server to current on both BIOS, as well as the Drac with Lifecycle Controller.
Let me know how it goes.