This post is more than 5 years old
1 Message
0
1592
PowerEdge T620/T630 network PCI hot-plug?
We have PowerEdge T620 & T630 servers. Per Dell compatibility spec checks and purchased from Dell, we acquired a couple Intel I350 PCI network cards (4 x 1 Gb). Can those servers are required to be powered down to install the cards, or if the servers can remain powered on in production and the cards can be hot-plugged?
DELL-Daniel My
Moderator
Moderator
•
6.2K Posts
0
August 29th, 2018 12:00
Hello
No, neither of those systems support hot-swap/hot-plug PCIe. I'm not sure if that is a feature of any of our servers. You can get more information about the systems from the manual. The manuals can be found on the system support page.
http://www.dell.com/support/
Thanks