Unsolved
This post is more than 5 years old
5 Posts
0
604
PowerEdge T710 memory
I have a poweredge T710 with 6 DIMM's in the A1, A2 A3 , B1, B2 and B3 slots, they are each 4GB, can I add 2 additional identical 4GB DIMMS? Would they go in the A4 and B4 slots? , the RAM that I have is 4GB (1X4GB) 1333MHZ PC3-10600 CL9 DUAL RANK X8 DDR3 ECC REGISTERED SDRAM 240-PIN DIMM, the mode is optimizer. If not is there a better way to increase the RAM , thanks !
DELL-Daniel My
Moderator
Moderator
•
6.2K Posts
0
February 20th, 2018 11:00
Hello
Please send a private message with your service tag to ensure we have all appropriate information on your system.
Thanks
AR9000
5 Posts
0
February 22nd, 2018 05:00
I think the correct slots are A1, A2 A4 and A5, B1, B2, B4 B5
DELL-Daniel My
Moderator
Moderator
•
6.2K Posts
0
February 22nd, 2018 08:00
Thank you for the service tag.
You are correct, that would be the best population for that number of identical modules. 1,2 and 4,5 on each side.
www.dell.com/support/home/product-support/product/poweredge-t710/
Thanks